-
Posts
192 -
Joined
-
Quote:Alternately, if you're looking for 4-pin MOLEX to SATA power:
http://www.monoprice.com/products/pr...seq=1&format=2
(Not that you said you were or anything, but I just wanted to put the option on the table...)
No, that's what I kept finding though, and that's why I was getting frustrated. But thank you.
HOWEVER, I LOVE Monoprice, their awesome pricing and shipping costs really highlight how very poor everyone elses is (especially shipping on small items). I'd sooo get it from them if I could. -
Quote:Yeesh, I knew it was staring me right in the face! I'd rather it didn't have the 1st plug, and I'll have to shave the sides of the male (or female...SATA power cables male/female designation confuses me, hehe) end off (sounds painful, hehe), but that'll do in a pinch.Is something like this what you are looking for?
Thanks TJ. -
Why am I having such a hard time finding one?! Ack!
I just need a silly SATA power female-to-male power cable!
(sorry, I know it isn't Co* related...well, not directly, at least...and I'm probably staring it right in the face...but I felt like venting...thank you)
-
Quote:Just don't live by the ocean. I just worked on a friend of mines pc who lives a few blocks from the water. He was having all sorts of trouble. Kept his PC by the window, with the window open on hot days. Opened up his tower and and it was just being eaten away.The ocean air was slowly disolving the inside...suprised it hadn't fallen apart allready.I'm going to do my damndest to get a single story home this summer. I often feel very sorry for my rigs and the environment they are forced to function in.
-
TJ Max is the temp that CPU will get to before it says "ouch" and starts to lower the multiplier itself in an attempt to rapidly cool itself down.
Quote:I wonder how much that says about hard drive reliability in general, and how much it speaks to the quality of drives that Google uses in their 'hundreds of thousands of servers'? -
Quote:http://www.hardocp.com/article/2010/...0_sli_review/7The new "Fermi" GTX 470 and 480 from Nvidia are rated to around 95 C in normal operation, but that has more to do with failure in engineering design than changing physical standards. North of 80 C, you probably do want to look into more aggressive cooling solutions to extend the service life of the card.
You be speaking the truths!
Only thing that's stopping tem from putting a 3slot cooling solution on those things...is that it would make the companies look REALLY stupid!
...wonder how overclocking (on the hobbiests side) on those things is going...no way it's happaning with stock coolers, I'll wager.
Wow, I'm just not winning tonight...but in my defense (and to agree with you), the Velociraptors are pure awesome and win(have one myself...but have custom cooling...hence my wager against them being cooler than 40-45...but not by much
).
-
Quote:Well, I do have to admit I was being a slight bit conservative...but you are right...still I'd probably amend that only up to 80c. "Rated up to 100c" is far different than "let's run this at 100c for every gaming session this gal has"...I couldn't see that system lasting very long.I'll disagree here. Modern GPUs are designed to run hot -- as long as you're not getting graphical glitches, it's perfectly fine for them to go as high as 100C.
Quote:I'll disagree strongly here. Google's drive failure study shows that failure rates are greatly increased if the drive temperature goes over 40C.
Sidenote: SSD's are really cool (pun intended), never have to worry about heat again, for those. -
I'm slightly tired, so take this with a grain of salt.
High enough (don't want to go over these unless you have to...and if you do, time for some house cleaning):
CPU = 65c
NB = 60c
SB = 60c
Mobo/PWM/Ambient case temp = 60c
Vid Card = 75c (I'll give a little extra here...GPU are suprisingly resiliant)
HDD = 55c
PSU = 70c
System makeup = irrelevent (sp?)
Anyone beg to differ? Just out of curiousity, really.
Edit: Oh, and OP, you're plenty fine. -
-
Had this happen once in FF. On a whim, I went to the upper floor (where the AE teminals are), and clicked on the glowing column (that ussually lets one enter AE missions) and it let me enter the regular mission.
Was very surprised that it worked...but it may not work all the time. Only happened once, so it could have been a huge fluke. -
-
"Rewards
- Fixed bug was causing drop rates to be slightly too low."
Edit: "Slightly"? -
-
Quote:Ack! Never clicking on your links again, Mateo!
-
-
Quote:So, it seems that GMs cannot award it on their own (my assumptions). That's too bad.I contacted support directly via petition both times it happened. In both cases it was escalated to a Senior Customer Support Representative. In both cases the response (from GM_Alura) was the same.
That response occurred a week ago, the same day I sent the petitions. There has been no action, follow up, or further comment from anyone at NCSoft about the issue.
I also PM'd Niviene several days ago, who responded saying she had forwarded it to the proper Dev. However, there has not yet been a Dev acknowledgement on the forums that the problem exists. -
-
You two are just completely missing the points tonight. Geez. Neither one of you obviously came in here looking for reasonable discussion. Have your rant and have fun.
-
Quote:These may be the most high profile exhibits of the problem. There may be hundreds of paper missions using the wrong maps right now...but you wouldn't be able to tell, because you don't know those by heart. Just sayin'.However, if no one actually touched Hess, I'd love to get a high-level of what actually caused this to happen to it. Specifically, I'd dig knowing how it, alone, seems to have this particular behavior. I'd expect a more general problem to be able to find its way into more missions, arcs, or Task Forces.
I always new butterflies were teh evil, Teh EVILLLLLLLLL!!11!!11!! -
Not trying to be a jerk, I swear, but has anyone contacted support directly on this? Wonder if maybe having a GM (in game) or support rep (via datamining on the account) look at it, might 1) get a GM to document it on file (like a 'Super Bug Report'
) and 2) maybe they can reward it to you if they see the req's are filled.
Just throwing it out there. -
Quote:I must have missed something. WHat changes in RV and Longbow Mech/Spider Mech?Why is there nothing in the patch notes about the changes in RV...The Longbow Mech/Spider Mech changes and the changes in inspiration and recipe drops were also changed but not listed...WHY??
Also, what changes in drop rates? YOu mean the possible (probable [sp?]) bug with drop rates? If so, I really do thinkk that's a bug with how the new dificulty settings work...but really just guessing on that one. -
Perfectly happy with any changes to Granite Form if if gets back the ability to use claws with Stone Armor.
Thank you.