Updater freezes.
First thing you should do is contact CoH support, they likely have some troubleshooting steps for you to try.
Manga @ Triumph
"Meanwhile In The Halls Of Titan"...Titan Network Working To Save City Of Heroes
Save Paragon City! Efforts Coordination
Some Unix advice: Use a SSH client to login to the mac when it freezes (even if your controlls behind the computer fails it will normally work)
Kill the CoH proc, you will likely have to use SIGSEGV, SIGKILL or perhaps even SIGILL.
This should abort (well it should "destroy" the proc) the updater.
If what I just wrote seems giberish ask several people you know about it or come back on it. It's slightly advance Unix stuff.
Hello everybody. I guess I'll start off with my comp specs. They are as follows:Model Name: MacBook Pro
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.6 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP31.0070.B07
SMC Version (system): 1.16f11
Serial Number (system): W874701D0LZ
Sudden Motion Sensor:
GeForce 8600M GT:
Chipset Model: GeForce 8600M GT
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0407
Revision ID: 0x00a1
ROM Revision: 3175
Displays:
Color LCD:
Resolution: 1440 x 900
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Built-In: Yes
Display Connector:
Status: No Display Connected: Enabled
When the updater is running it states: "Fixing file: pigg/geom pigg".
Once it gets to around 29 MB of a 32 MB file, it freezes. If I hit quit, the whole computer freezes. I can't even get into the pull down menus to force quit. The last attempted upgrade caused a very high pitched noise around the left lower corner of the computer where the hard drive is located, very disturbing. So what is going on and are there any tips? Thanks in advance.