Quote:
Check up on the top right when you're in item laying mode, and when you click the square the wall is on. It'll show a little layered chart, just click to remove whichever layers you want.
|
Originally Posted by Hollows
Kinda new to base building and was trying a "light in the wall" effect with a torch I think. Thought it looked cool how the light appeared to becoming from inside the wall. Now I don't want the wall anymore but can't take it down. Any suggestions or fixes for this?
|
Quote:
I don't think that will work if there is an item obstructing or imbedded in the wall.|
Originally Posted by eth_Nargy
Check up on the top right when you're in item laying mode, and when you click the square the wall is on. It'll show a little layered chart, just click to remove whichever layers you want.
|
What I usually do is scroll my camera out and angle it from underneath the floor of the base in edit mode. Then select the offending item and delete it.
If that fails, I usually go into the "current room" tab (you need to be standing in the affected room), scroll through the mass of crap until I find the offending item, and "sell" (delete) it from there.
A note about the "current room" tab: it adds items to the end of the bar/list as you add them to the room... So it's kinda time-related. If you placed something early on in your decorating, it will appear at the beginning of the bar/list. If you *just* placed something, it will appear at the end of the bar/list. If you know you placed a few other things within the same time frame, you can look for the same "group" of items to find the one you need.
Hope that helps a little.
.
Quote:
|
Don�t say things. What you are stands over you the while, and thunders so that I cannot hear what you say to the contrary. - R.W. Emerson |
YUMMY Low-Hanging Fruit for BASE LUV
What Impish Kat said!
The Current Room option should allow you to find, target and remove the buried item, which should allow you to get rid of the wall!
@Zethustra
"Now at midnight all the agents and the superhuman crew come out
and round up everyone that knows more than they do"-Dylan
and round up everyone that knows more than they do"-Dylan
Quote:
Woot. That worked! Didn't even think about looking under the base. Had a wall torch and 2 floor lamps in there. Looked really cool, but so annoying that I couldn't break the wall down.|
Originally Posted by Impish Kat
I don't think that will work if there is an item obstructing or imbedded in the wall.
What I usually do is scroll my camera out and angle it from underneath the floor of the base in edit mode. Then select the offending item and delete it. If that fails, I usually go into the "current room" tab (you need to be standing in the affected room), scroll through the mass of crap until I find the offending item, and "sell" (delete) it from there. A note about the "current room" tab: it adds items to the end of the bar/list as you add them to the room... So it's kinda time-related. If you placed something early on in your decorating, it will appear at the beginning of the bar/list. If you *just* placed something, it will appear at the end of the bar/list. If you know you placed a few other things within the same time frame, you can look for the same "group" of items to find the one you need. Hope that helps a little. . |
Thanks so much! And thanks to all that replied.
Also had a few piles of dirt in the way as well.
Hollows
Beware the Woods at Night.
Miles to go and Skies to Fly!
Kinda new to base building and was trying a "light in the wall" effect with a torch I think. Thought it looked cool how the light appeared to becoming from inside the wall. Now I don't want the wall anymore but can't take it down. Any suggestions or fixes for this?
Hollows
Beware the Woods at Night.
Miles to go and Skies to Fly!